A Topside company - serving Palmdale, CA

Before & After Gallery - Topside Attic Insulation Palmdale

Insulation Before & After in Palmdale, CA

We’ve insulated and sealed more than 9,000 homes since 2016, and every one of them started with a problem a homeowner could see or feel. The photos below show what that actually looks like: compressed batts in a 1980s Palmdale tract home, a crawl space with no vapor barrier against the Mojave dust, an attic floor leaking conditioned air through every top plate. We document every job with before-and-after photos, blower-door numbers, and a written scope you get before anyone lifts a tool. Seeing the work beats reading about it.

Call (661) 403-4467

Recent Transformations

Attic Insulation Replacement: R-11 Batts to R-38 Blown-In, Rancho Vista

Before: thin, discolored fiberglass batts compressed below ceiling joists in a Palmdale attic
Before: original R-11 batts, well below current Palmdale code minimums
After: even layer of blown-in cellulose filling joist bays to full R-38 depth in a Palmdale attic
After: R-38 GreenFiber blown-in cellulose at proper depth, with air-sealed top plates

The homeowner bought a 1992 build in Rancho Vista and couldn’t get the upstairs below 78 degrees in July. We pulled back the insulation and found R-11 batts compressed to R-8 in places, with unsealed can lights and a bathroom vent dumping conditioned air straight into the attic. We air-sealed every penetration, baffled the soffit vents, and blew R-38 cellulose to a uniform 12 inches. The blower-door test read 3,800 CFM50 before we started and 2,400 after. Their August electric bill dropped $87 from the prior year, same thermostat setting.

Crawl Space Encapsulation & Vapor Barrier, Anaverde

Before: exposed dirt crawl space with standing moisture and no vapor barrier in a Palmdale home
Before: bare dirt, no vapor barrier, fiberglass batts sagging from floor joists
After: fully encapsulated crawl space with white vapor barrier sealed at seams and insulated walls in a Palmdale home
After: 10-mil reinforced vapor barrier sealed to foundation walls, R-13 rigid foam on stem walls

This Anaverde home had a musty smell that wouldn’t quit and floors that ran cold in winter. The crawl space was bare dirt with no vapor barrier, and the fiberglass batts between joists were black with dust and starting to fall. We removed the contaminated insulation, graded the soil, laid a 10-mil reinforced vapor barrier with sealed seams and mechanical fastening at the walls, and insulated the stem walls with R-13 Rockwool rigid foam. The relative humidity in the crawl space dropped from 67% to 41% within 48 hours. No more smell, and the floors hold temperature.

Spray Foam Insulation: Open-Cell in Knee Walls, Quartz Hill

Before: uninsulated knee wall cavities with exposed studs and no air barrier in a Palmdale area bonus room
Before: open knee wall cavities, no air barrier, room unusable in summer heat
After: open-cell spray foam filling knee wall cavities completely, creating air barrier and thermal boundary in a Palmdale area home
After: 5.5 inches Icynene open-cell spray foam, R-19 with full air seal

A Quartz Hill homeowner had a finished bonus room over the garage that hit 95 degrees by 2 PM in June. The knee walls were open studs with no insulation and no air barrier, so attic air moved freely through the cavities. We applied 5.5 inches of Icynene open-cell spray foam to the knee walls and the sloped ceiling, creating a continuous thermal and air boundary. The room now stays within 4 degrees of the downstairs thermostat. We delivered the before-and-after blower-door reading, the photo record, and the written warranty before we packed up.

Attic Air Sealing & Radiant Barrier, West Palmdale

Before: unsealed attic with visible gaps around chimney chase and no radiant barrier in a Palmdale home
Before: unsealed penetrations, no radiant barrier, ductwork in 140-degree attic air
After: sealed attic with radiant barrier stapled to rafters and sealed duct boots in a Palmdale home
After: sealed top plates and penetrations, Owens Corning radiant barrier, duct boots mastic-sealed

This West Palmdale home had a 5-ton AC that ran continuously from noon to sunset and still couldn’t hold 75 degrees. The attic was 145 degrees on a July afternoon, with unsealed can lights, a chimney chase you could see daylight through, and flex duct lying directly on the insulation. We air-sealed every penetration with fire-rated caulk and foam, mastic-sealed all duct boots and connections, and stapled an Owens Corning radiant barrier to the rafters. The attic temperature dropped to 108 degrees on the same outdoor conditions. The AC now cycles normally, and the homeowner got the blower-door printout showing 4,100 CFM50 before and 2,600 after.

Insulation Removal & Replacement After Rodent Damage, East Palmdale

Before: contaminated attic insulation with rodent droppings and compressed tunnels through fiberglass batts in a Palmdale home
Before: heavily contaminated batts with rodent runs, compressed and displaced insulation
After: clean attic floor with new R-38 blown-in insulation and sealed entry points in a Palmdale home
After: full removal, sanitization, rodent proofing, and new R-38 Knauf EcoFill blown-in

An East Palmdale homeowner heard scratching for three weeks before calling us. The attic had active rodent runs through the original fiberglass batts, with contamination in about 60% of the insulation volume. We removed and bagged all contaminated material, HEPA-vacuumed the deck, applied enzymatic sanitizer, and rodent-proofed every entry point with steel mesh and foam. Then we blew in R-38 Knauf EcoFill to proper depth. The photo record shows the full process, and the written scope includes the rodent-proofing warranty. Under our 365-Day Done Right Promise, if anything gets back in, we make it right.

Wall Insulation: Dense-Pack Cellulose, Vintage Palmdale Home

Before: exterior wall with no insulation visible through outlet cutout in a 1960s Palmdale home
Before: empty wall cavities, no insulation, original 1962 stucco with no WRB
After: dense-pack cellulose filling wall cavity completely around electrical box in a Palmdale home
After: dense-packed GreenFiber cellulose at 3.5 lbs per cubic foot, full cavity fill

A 1962 home near Palmdale Boulevard had walls that were basically outdoor temperature. We drilled 2-inch holes at the top of each stud bay from the exterior, dense-packed GreenFiber cellulose at 3.5 pounds per cubic foot to eliminate settling, and patched with color-matched stucco. The walls went from R-0 to R-13, and the homeowner reported the furnace running 40% less on cold mornings. We delivered the written price before starting, the photo record at completion, and the blower-door numbers showing the whole-house improvement from the wall work combined with attic air sealing.

Want Results Like These?

Technician installing blown-in attic insulation for improved home energy efficiency
Want Results Like These?

Every job starts with a written price, a written scope, and a written warranty before anyone lifts a tool. That’s Haven Standard Clause 1, and it’s how we’ve worked since 2016. Call (661) 403-4467 and a live person will answer, 24/7. We’ll schedule a free estimate, review any competing quote with you at no charge, and show you exactly what your before-and-after documentation will look like. No voicemail loops, no callback windows measured in business days.

Written by Wes Okafor, Owner at Topside Attic Insulation Palmdale, serving Palmdale since 2016.

Need Insulation help in Palmdale? Licensed & insured · 1-hour response · free estimates
Call (661) 403-4467
Local Service Coverage

Request a Free Estimate in Palmdale

Tell us what you need - Topside Attic Insulation Palmdale responds fast. No obligation.

By submitting this form, you accept our Privacy Policy and consent to being contacted through phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Text Us
Call Now - 24/7 Dispatch