Demilec Home Energy Audit Nationwide

Demilec Home Energy Audit in Palmdale: What to Know First

We provide independent Demilec home energy audit in Palmdale, typically completed same-day or next-day, with a written price before any work starts and blower-door numbers delivered before we leave. Most audits run between $180 and $420 depending on the scope, and we publish before-and-after pressurization readings on every job so you see the actual performance change. This page is for Demilec owners in Palmdale, Rancho Vista, and the surrounding Antelope Valley who want documented evidence of what’s failing in their building envelope and what it’ll cost to fix it right. Call us at (661) 403-4467 for a free estimate.

Call (661) 403-4467

How Demilec Products Fail - and How We Fix Them

• Demilec SEALECTION 500 open-cell spray foam shrinkage in high-temperature attics. In Palmdale, where Rancho Vista corridor attics regularly hit 140°F, we’ve found SEALECTION 500 pulling away from top plates and rafter heels after 6-10 years. The foam itself is sound, but thermal cycling at the Zone 3/4 boundary creates gap migration. We cut back the compromised section, seal the substrate with Demilec-recommended primer, and reinstall to manufacturer density specs, then run a blower-door test to prove the envelope is tight before we close up.
• Demilec Heatlok HFO Pro closed-cell delamination from OSB roof decks. This shows up as a “drum” sound when you tap the foam and elevated moisture readings in the sheathing. The HFO blowing agent performs well in our dry climate, but application during high-humidity windows or over damp OSB from nighttime cooling causes bond failure. We remove the delaminated section, let the deck hit proper moisture content, and reapply at the 2-inch pass limit with inter-pass timing tracked on our job sheet.
• Demilec Heatlok XT missed thickness in complex framing bays. The 2.0 lb density foam doesn’t flow into acute angles the way open-cell does; we find 1-inch pockets behind valley rafters and dormer cheeks where the specified R-value was never achieved. Our audit includes bay-by-bay probing with a depth gauge, and we mark deficient areas on your photo record so you know exactly where the thermal bypass is.
• Demilec Agribalance agricultural-formula off-gassing in conditioned attics. Palmdale homeowners with converted attic space sometimes report odor persistence months after installation. Agribalance is a solid product for unconditioned spaces, but the bio-based polyol chemistry needs longer venting in occupied envelopes. We identify whether the issue is incomplete cure (fixable) or misapplication (removal and replacement), and we document the distinction because Demilec warranty coverage differs between the two.
• Demilec SEALECTION Agri-Bond rodent intrusion at foam-to-wood interfaces. The soy-derived content attracts nesting behavior in our high-desert environment where roof rats move from palm groves into subdivisions. We don’t just patch the foam; we seal the entry pathway with stainless mesh, repair the thermal barrier, and note the pest vulnerability on your documentation so you can address it with a separate contractor if needed.

Our Demilec Home Energy Audit Process

1. 1
   Call and schedule. A live person answers 24/7. We ask about your Demilec product line, install date if known, and what symptom you’re seeing, high bills, hot rooms, or visible foam degradation.
2. 2
   On-site inspection with thermal imaging. We scan the envelope with FLIR to find thermal anomalies, then probe suspect areas for depth and density. Every finding gets a photo with a timestamp.
3. 3
   Blower-door test. We pressurize the house to 50 Pascals and record the CFM50 reading, this single number tells us how much conditioned air you’re losing and gives us a baseline for any air-sealing work.
4. 4
   Written scope and price. Before any work starts, you get a flat price, a written scope detailing what Demilec-compatible materials we’ll use, and the 365-Day Done Right Promise in writing. Haven Standard Clause 1: no exceptions.
5. 5
   Repair or seal, then retest. We complete the work, run a second blower-door test, and leave you with printed pre- and post-installation reports showing the CFM50 numbers side by side. Seal the leaks first. The insulation is just the last step.
6. 6
   Documented Photo Record delivery. Within 24 hours you receive a link to your full photo set, including thermal images, depth gauge readings, and the blower-door report.

Before

After

What Demilec Home Energy Audit Costs in Palmdale

These are real ranges for Palmdale homes we’ve worked on, not teaser rates. The exact price depends on what the blower-door test and thermal imaging actually show, which is why we don’t quote over email without seeing the space. Estimates are free, and we offer a Free Second Opinion on any written estimate you’ve already received. Call (661) 403-4467 to schedule.

Why Palmdale Homeowners Call Topside Attic Insulation Palmdale for Demilec Work

We’ve sealed and insulated over 9,000 homes since 2016, and the ones with Demilec products require a specific diagnostic approach, the shrinkage patterns in SEALECTION 500 don’t look like the delamination in Heatlok HFO Pro, and treating them the same wastes your money. Wes Okafor runs a blower-door test before and after every job, leaving you with printed CFM50 numbers that prove the result. Our 365-Day Done Right Promise covers all completed work, backed by a written scope delivered before anyone lifts a tool. We also service Reflectix and other major brands, so if your audit reveals that a different material makes more sense for your specific Palmdale home, we’ll tell you straight. No proprietary lock-in, no upsell pressure. Just the number, the documentation, and the fix.

FAQs